Flygoo PVDF 1/4′ ′ Ozone Venturi for Ozone Generator

Product Description

Flygoo PVDF 1/4'' Ozone Venturi for Ozone Generator /Ozone Generator Part

Product Description

The VI- series ozone venturi injectors of Flygoo are designed to be used with an ozone generator for water treatment. It is excellent for ozone mass transfer. Molded PVDF & PVC rugged construction ensure its lifetime. Ozone suction port quickly transfers ozone gas into water stream under pressure. The standard ranges 1/2 to 1 inch, and the water flow rate ranges 0.2-10.0m3/h, which can be used in various ozone gas water mixing situations. Applications: Ozone to water mixing

What is a Venturi Injector?

Widely used for the injection of air, oxygen, and ozone. Also compatible with liquids. Tests have shown that when installed properly, injectors can transfer ozone into water with efficiencies as high as 99%.

The ozone venturi injector is made of three parts, which is tressurized pipe, the suction chamber, and the nozzle. It is a gas water hybrid approach which use the venturi principle. The ozone venture produce the negative pressure which use the high-speed water flow the throat of the mixing tube, cause the vacuum state of the suction chamber, under the influence of the pressure difference, the input-gas is sucked to the mixing tube. 

The water is stir strongly, gas is smashed to the small air bubble, turn into Gas-water emulsion of the mist, finally, be erupt through the spread port of the mixing tube, in continued, begain the Vortex stirring in the next tube, make the gas dissolve in the water.

 

Product Feature

 

 

1. Innovative Venturi design Innovative design of convergent, throat and divergent sections of Venturi for more injection rate.
2. Additional Valve Provided Additional Valve provided for suction side to prevent reverse flow of water.
3. Additional Fine Suction Filter To avoid entry of solid particles in system, additional suction filter is provided.
4. Various Option Available Venturies are available from ½", ¾", 1", 1¼", 1½", 2"

5. Made of engineering plastic.
6. Excellent chemical resistance to most of the chemicals.
7. Highly efficient and compact differential pressure injection device.
8. Economical and low cost option.
9.Available in ¾", 1", 1¼", 1½" and 2" BSP inlet / outlet connection. Any other size can be supplied on demand.

10.No moving parts ;Durable PC construction; Completely ozone compatible; Check valve included in injection port ; Quick installation

 

Product Parameters

 

Model	1/2''	3/4''	1''
Material	PVDF+PVC	PVDF+PVC	PVDF+PVC
Water Flow(m3/h)	0.2-1	1-3	3-10
Air Flow(Nm3/h)	4-7	7.5-10	11-15
Water Connection	1/2 inch	3/4 inch	1 inch
Air Inlet(inch)	1/4	1/4	1/2
Input Water Pressure(kg/cm2)	2-4	2-5	2-5

Ozone Generator Features:

1. Innovative Venturi design Innovative design of convergent, throat and divergent sections of Venturi for more injection rate.
2. Additional Valve Provided Additional Valve provided for suction side to prevent reverse flow of water.
3. Additional Fine Suction Filter To avoid entry of solid particles in system, additional suction filter is provided.
4. Various Option Available Venturies are available from ½", ¾", 1", 1¼", 1½", 2"
5. Made of engineering plastic.
6. Excellent chemical resistance to most of the chemicals.
7. Highly efficient and compact differential pressure injection device.
8. Economical and low cost option.
9.Available in ¾", 1", 1¼", 1½" and 2" BSP inlet / outlet connection. Any other size can be supplied on demand.
 

Certifications

 

Company Profile